ఇంటర్నేషనల్ జర్నల్ ఆఫ్ అడ్వాన్స్మెంట్స్ ఇన్ టెక్నాలజీ
అందరికి ప్రవేశం
ISSN: 0976-4860
ISSN: 0976-4860
Al Lehyani SHA, Hassan RA, Alharbi AA, Alomayri T and Alamri H
Nanoparticles possess unique properties, which can be applied in medical applications; they address targets such as cellular therapy, tissue repair, Nano-biosensors, drug delivery, magnetic resonance imaging and magnetic fluid hyperthermia. In this work, different sized cobalt ferrite nanoparticles (CFNP) were synthesized with narrow size distribution, by using chemical precipitation methods, to aim for finding the optimum particle size which has high heating efficiency in the applied magnetic field. The obtained powder was calcined at different temperature (600°C, 800°C, 900°C, and 1000°C). The sample which characterized by Transmission Electron Microscopy (TEM) confirmed the formation of single-phase CFNP in the range 10–115 nm depending on the annealing temperature and Vibrating Sample Magnetometer (VSM) to get the magnetization and coercivity of the powder. Localized magnetic particle hyperthermia treatment using ferrimagnetic nanoparticles continue to be an active area of medical application. So, homemade induction heater was designed. The induction heater was designed to be capable of generating high frequency, strong alternative magnetic fields (8 kA·m–1, 135 kHz). In vitro heating efficiencies in test tube, at a MNPs concentration of 250 mg CFNP·ml-1, were measured in the applied field. The temperature increase (ΔT) of the tube content at 60 s was 29.9°C for MNPs of 18 nm, 26.7°C for 25 nm, 25°C for 60 nm and 22.9°C for MNPs of 95 nm. The smallest nanoparticles (18 nm) exhibiting a high heating efficiency. In conclusion, we found that the size of the CFNP increased with increasing the calcined temperature at which the synthesis of the nanoparticles was performed. The heating efficiency of the particles was improved with decreasing particle size from 95 nm to 18 nm in the alternating magnetic field.