జర్నల్ ఆఫ్ ఓషనోగ్రఫీ అండ్ మెరైన్ రీసెర్చ్
అందరికి ప్రవేశం

నైరూప్య

Acoustic Doppler Current Profiler to Measure Current Velocity

Anurupa Goswami

Doppler speed log, an instrument that measures the speed of ships through the water or over the sea bottom was used before adcp. The first ADCP which was commercial, was based on concept of a commercial speed log. The speed log was refabricated to measure water velocity more precisely and to allow measurement in range cells over a depth profile. Henceforth, the first vessel-mounted ADCP was made. TRDI produced its first ADCP, a self-contained instrument designed for use in long-term in 1982. TRDI produced its first vessel-mounted ADCP In 1983. By 1986, TRDI had made five different frequencies (75-1200 kHz) and three different ADCP models (self-contained, vesselmounted, and direct-reading). The concept of Doppler signal processing has established itself with the instruments afterwards. Speed logs used relatively simple processing with phase locked loops. The first generation of ADCPs used a narrow-bandwidth, single-pulse, autocorrelation method that computes the first moment of the Doppler frequency spectrum. This method was the first to produce water velocity measurements with sufficient quality for use by oceanographers.

Measurements of current velocity of streams, rivers, oceans are very important for:

Study of biological life, Transportation, Weather study, Ecological study, Pattern of seasons.

Some examples of adcps are:

Sea profiler adcp’s are designed for real-time current profiling applications, Sea watch adcp’s are well suited for deployments on buoys, moorings or sea-floor structures, The Sea wave vertical beam and standard pressure sensor provide accurate, higher frequency wave measurements that interfaces seamlessly.